Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in University City?
Duct repair and sealing in University City typically costs $285 to $650 for most residential jobs, with a whole-home sealing and repair scope running $900 to $2,200. Small fixes like a single disconnected joint or a torn flex run usually land at the low end, while replacing damaged trunk line sections or sealing an older home’s full duct system pushes toward the higher figures. Every price is set per job by the written estimate, and the estimate itself is free.
University City homes deal with a specific set of conditions that make ductwork work harder. Hot, humid summers and shoulder-season pollen loads hammer the Charlotte area, and attic duct systems here run through spaces that get very hot in July and August. When a seam opens or insulation pulls back, that brutal attic heat and moisture find their way into the supply air. Repair and sealing closes the gaps so the system moves the air it was designed to move.
- Typical spot repair: $285 to $485
- Partial system repair and mastic sealing: $500 to $1,100
- Whole-home duct sealing and repair: $900 to $2,200
- Free written estimate: always, before any work begins
Call University City Air Duct Cleaning at (888) 972-5826 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Duct Repair & Sealing Cost Breakdown (2026)
What you pay depends on how many problems are found and how far they run. Here’s how the line items typically stack up for a University City home in 2026.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Disconnected joint or boot reconnection | $145 – $285 | Reattaching a separated run at the register boot or plenum |
| Flex duct run replacement | $185 – $420 per run | Swapping a torn or crushed flex run for new insulated flex |
| Rigid duct section repair | $250 – $600 | Patching or replacing damaged sheet metal trunk or branch sections |
| Seam and joint sealing (mastic) | $180 – $550 | Brushing mastic on accessible joints, collars, and seams |
| Whole-home duct sealing | $650 – $1,400 | Sealing every reachable joint across the supply and return system |
| Insulation repair or re-wrap | $200 – $700 | Replacing torn or fallen duct insulation in attic or crawlspace runs |
| Full repair and seal with cleaning | $900 – $2,200 | Cleaning the system first, then repairing and sealing the pathway |
What pushes a job up or down? The biggest driver is access. Ducts running through a conditioned crawlspace or an attic with good decking are faster to reach than a tight, low-clearance space. The second driver is the number of problem points. A single disconnected boot is one line item. A house where half the supply runs have pulled loose and the trunk has a few open seams is a much larger scope. Third is whether the system needs cleaning before sealing. Sealing over a dirty pathway just traps the debris, so pairing the two makes sense and often costs less than booking them as separate appointments. At the top end, replacing a collapsed rigid trunk section or fixing a crushed main run can push the total toward the higher figures, especially in older University City homes where ductwork has never been touched.
If you want the full picture of what duct repair & sealing involves from inspection to final seal, that page walks through the process step by step.
What Affects Duct Repair & Sealing Pricing in University City
University City has its own quirks. The mix of 1980s and 1990s subdivisions southeast of the university with homes built or renovated more recently creates wildly different duct scenarios in the same neighborhood. Here are the factors we weigh when pricing a job here.
- Home age and ductwork condition. In older University City neighborhoods, duct systems have had many summers of expansion and contraction in hot attics. Seams that were taped decades ago have failed, and foil tape has dried out. A job that’s mostly re-taping and mastic work prices lower than one where runs have actually separated from boots.
- Access to the duct pathways. Attic runs in the Charlotte heat are easy to see from below but hard to reach when the roof pitch is steep or the insulation is deep. Low-clearance crawlspaces add time. We factor access into the estimate honestly so there are no surprises.
- Number of leaks and disconnected runs. A lone boot needing reconnection is a quick job. When a whole wing of the house is bleeding air through multiple gaps, the scope and price both rise.
- Duct material type. Flex duct is inexpensive to replace but settles and kinks easily. Rigid metal ducting lasts longer and costs more to repair section by section. Homes in University City mix both, and the estimate reflects the actual material.
- Insulation condition. Torn or fallen duct insulation in the attic means the system loses cooling to the attic air before it ever reaches a room. Re-wrapping is often part of the repair, and it’s a real line item.
- Whether cleaning is needed first. If the system is dirty, cleaning first then sealing delivers the full benefit. Doing it in one appointment costs less than two trips.
How to Save on Duct Repair & Sealing
Spending smart here comes down to three things: get the whole system looked at once, fix the root cause instead of patching the symptom, and pair services that share a visit.
- Get a whole-system inspection up front. A single inspection that documents every leak is cheaper than three separate trips to chase problems one at a time. Ask for the estimate in writing, noting each problem point and its price.
- Clean before you seal. If the ducts are dirty, cleaning and sealing together saves a second visit. You also avoid sealing dust and debris into the path.
- Fix the leaks that matter first. If you can’t do the whole system right now, prioritize the supply trunk and boot connections that feed the rooms you actually use. Those give the biggest comfort return.
- Address insulation while the ducts are exposed. If a technician is already in the attic repairing a run, re-wrapping a torn section then is less costly than asking for it later.
- Ask about pairing with air quality work. Sealing closes a pathway for contaminants to re-enter. If you’re also planning filtration or sanitizing, doing it while the system is open makes sense.
The estimate is free, and there’s no fee for a service call. Call (888) 972-5826 to book one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
FAQs – Duct Repair & Sealing Cost
How much does duct sealing cost in University City?
Whole-home duct sealing in University City typically runs $650 to $1,400, while spot sealing of a few joints lands around $180 to $550. The written estimate sets the final price after we see how many joints are accessible and how much sealing the system actually needs. Call (888) 972-5826 for an exact quote – estimates are free.
Is duct repair cheaper than replacing the whole system?
Yes, almost always. Repair and sealing at $285 to $2,200 costs a fraction of replacing ductwork throughout a house. Repairs make sense when the duct layout is sound and the problems are joints, runs, or insulation. If large sections of the trunk line have collapsed or the system was badly designed from the start, replacement is worth discussing. The estimate will tell you which situation you’re in.
How much does it cost to fix a disconnected duct in University City?
Reconnecting a single disconnected joint or register boot typically costs $145 to $285. If several runs have pulled loose, the total climbs based on how many need reattachment. Call (888) 972-5826 to get it looked at and priced – estimates are free.
Why do my energy bills keep climbing even after cleaning?
Cleaning removes debris, but it doesn’t close the gaps where conditioned air escapes. If seams are open and boots are disconnected, the system keeps losing air into the attic or crawlspace no matter how clean it is. Sealing the pathway is what stops the loss. We can check the joints on the same visit. Call (888) 972-5826 – estimates are free.
Can you repair and seal ducts the same day?
Yes, same-day work is available when we have a slot, and many straightforward repairs get sized during a single visit. Whole-system sealing jobs are typically scheduled as their own appointment after the estimate. Call (888) 972-5826. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
What Our Duct Repair and Sealing Work Covers
Sealing a duct system properly isn’t a matter of grabbing a roll of tape. We use mastic, which cures to a lasting seal at the joints, collars, plenum connections, and boots. Where insulation has pulled back from the ducts, we restore it. Where a flex run has been crushed or sliced, we replace it. On a whole-home job, the goal is a continuous sealed pathway from the return grille all the way through to the supply registers, so the system can move air where it’s supposed to and pull in less attic air in the process.
Our technicians have up to 15 years of experience with this equipment, and we use professional-grade Rotobrush and Nikro duct systems, not consumer-grade shop-vac setups. We also work with Honeywell and Aprilaire whole-home air quality products, so if sealing or repair is one piece of a larger plan to improve what’s moving through your air, we can map that out with you. If your airflow problems trace back to contamination rather than leaks, our air duct cleaning in University City starts with a full-system look before any cleaning begins, and for dryer duct concerns we handle that as its own service. For HVAC coil and cabinet cleaning, or air quality and sanitizing, each of our five service lines covers a piece of the same air pathway, which is why a lot of University City homeowners address several things in one appointment.
Every estimate is free, the price is per job, and the written estimate is what you’ll pay. Call (888) 972-5826. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Our technicians come out and look at your system before anyone quotes a number, and we don’t guess from a phone description when it matters.
Pricing reflects the University City market as of 2026. University City Air Duct Cleaning offers free estimates – call (888) 972-5826.
What Our Customers Say
"Did the dryer vent while they were here for a small add on price. The dryer now finishes a load in one cycle instead of two."
- Jerome Dawson"Fair price and thorough work. They ran about an hour and a half past the estimated finish time, so don't schedule anything tight after."
- Steve Hayes"Two guys, about three hours, plastic down at every register, and they wiped the vent covers before putting them back."
- Erin Anderson