Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for University City Homeowners
Most duct problems in University City announce themselves quietly: a room that never quite heats, dust that settles again a day after you wipe it, or a faint whistle at the register when the blower kicks on. Those are usually leaks, torn flex runs, or joints that let go inside a wall cavity. Our technicians have up to 15 years of experience reading exactly these symptoms, and we work with professional-grade Rotobrush and Abatement Technologies gear rather than improvised tools. We repair and seal the ductwork itself, so the air you pay to condition reaches the rooms it was meant for. For a free estimate, call (888) 972-5826. Same-day service is often available in University City.
What Our Duct Repair & Sealing Service Includes
Duct repair is a different discipline from duct cleaning. Cleaning removes what has settled inside a system that works; repair and sealing fix the system so it stops losing air and stops pulling unfiltered air in through gaps. We look at the whole pathway, from the air handler connection out to the last supply boot, because a sealed trunk line is worth little if the branch runs behind it are torn. The six categories below cover what we actually do on a University City job.
Duct Sealing
Duct sealing closes the gaps between duct sections, at seams, collars, and the joints where a run meets a register boot. You need it when rooms closest to the air handler get plenty of air and rooms at the end of the line get very little, which is the classic signature of a leaking distribution system. We seal those joints with mastic rather than relying on tape alone, because tape lifts over time in a hot attic.

Flex Duct Repair
Flex duct is the insulated, corrugated run you’ll find feeding most registers in University City homes built in recent decades. It fails when it’s crushed against a joist, kinked at a tight turn, or torn by a contractor working in the attic. We replace failed sections, re-stretch runs so they’re as straight as the space allows, and support them properly so they hold their shape.

Metal Duct Repair
Sheet metal trunk lines and older rigid branch runs develop popped seams, loose connections, and vibration rattle as fasteners work free over time. You’ll hear it before you see it: a thump or rattle at startup that wasn’t there a year ago. We re-secure the connections, seal the seams, and correct the hangers so the line runs quiet again.

Duct Insulation
Duct insulation is the wrap around the duct that keeps conditioned air at temperature as it travels through an unconditioned attic or crawlspace. When the wrap is torn, compressed, or missing altogether, the air arrives at the register warmed or cooled off and the system runs longer to compensate. We repair or replace compromised insulation and re-wrap joints so the vapor barrier closes properly.
Mastic Sealant
Mastic is a brushable sealant that bonds to sheet metal, flex collars, and duct board and sets up as a permanent, flexible seal. It’s the right material for seams and plenum connections where tape would eventually dry out and peel. We apply it where the duct actually leaks, then check the joint, so the seal is verified and not just assumed.
Air Leak Repair
Air leak repair is the diagnostic half of the job: finding the leaks before deciding what to fix. Leaks hide at plenum seams, at disconnected flex collars in the attic, at poorly cut register openings, and at the air handler cabinet itself. We locate them by inspecting the whole run and, where it helps, measuring how the system is actually moving air, then we close them at the source.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
Duct repair touches whatever equipment the duct is connected to, and the equipment matters. We work with Honeywell and Aprilaire whole-home air quality products, which means when a filtration or humidification component sits inline with the ductwork, we understand how it’s supposed to be fitted and where the connections tend to fail. We also work with Guardsman products as part of the broader system we service, so a repair doesn’t leave a filter cabinet or a return-side component sitting loose.
On the diagnostic and remediation side, we’re trained on Abatement Technologies air filtration and remediation equipment and we run Rotobrush and Nikro professional duct cleaning systems. That combination matters when a repair follows a contamination problem: we can clean, repair, and seal a system without handing it between companies and losing the thread. Whether your system runs Aprilaire, Honeywell, Guardsman, or any other make, we can help figure out what’s failing and what it takes to correct it.
Signs You Need Duct Repair & Sealing Right Now
Duct problems rarely resolve on their own. A small leak tends to grow, and a torn flex run tends to tear further. These are the signs we see most often in University City homes:
- Rooms that never match the thermostat. If the front of the house is comfortable and the back bedrooms aren’t, air is almost certainly escaping somewhere between the air handler and those rooms. Sealing the leaks restores balance without changing the equipment.
- Dust returning within a day of cleaning. A sealed duct system holds pressure and keeps dust out. When gaps pull air in from an attic or crawlspace, that air carries dust and insulation fibers with it, and surfaces re-coat quickly.
- A whistling or rattling at startup. Whistling usually means a restricted or oversized opening; rattling usually means a loose connection or a hanger that’s given way. Both are audible clues that point to a specific joint we can inspect.
- Higher energy bills with no other change. Leaky ducts push the system to run longer to hit the same setpoint. If consumption has crept up while your habits haven’t changed, the distribution system is worth a look before you consider replacing equipment.
- Visible damage in the attic or crawlspace. Crushed flex, disconnected collars, torn insulation wrap, and duct runs resting on the ceiling joists are all common in older homes. We can inspect the runs and tell you what’s repairable and what needs replacing.
Our Duct Repair & Sealing Process – Step by Step
- 1
We start with a full inspection of the duct system. That means opening the air handler cabinet, walking the trunk and branch runs in the attic or crawlspace, and checking each register connection. We’re looking for disconnected joints, crushed flex, torn insulation, and sealant that has failed.
- 2
We identify and prioritize the leaks. Not every leak costs the same. A disconnected collar feeding three bedrooms matters more than a small seam on a dead-end run. We map what we find and explain which repairs will actually change how the system performs.
- 3
We give you a written, flat price per system before any work begins. The estimate is free, and the number you agree to is the number you pay. There’s no per-vent pricing and no surprise add-ons once the technician is on site.
- 4
We perform the repair and seal the system. That can include replacing flex runs, re-securing metal connections, repairing insulation wrap, and applying mastic at seams and collars. We photograph the work as we go so you can see what changed.
- 5
We verify the result and walk you through it. We check the connections we closed, confirm airflow at the registers, and show you before-and-after photos of your own ductwork. If we recommend a follow-on step, like cleaning a contaminated system after a repair, you’ll hear the reasoning.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in University City?
Duct repair and sealing in University City typically runs $250 to $900, with most single-system jobs landing in the $350 to $650 range. The wide spread comes down to how many leaks there are, how accessible the ductwork is, and whether flex runs need replacing or just reconnecting. A typical air leak repair focused on a handful of joints runs $180 to $400. A full mastic sealing of trunk lines and accessible branch connections runs $400 to $900. Flex duct repair, where sections are replaced and re-stretched, runs $300 to $800 depending on how much has to come out. Duct insulation repair runs $250 to $700 based on how much wrap has failed. These are typical estimated ranges for this market; your written estimate sets the final price.
What affects the cost: accessibility of the attic or crawlspace, the number of separate leaks, whether the duct is flex or rigid metal, and whether other work (cleaning, HVAC service) is being done in the same visit. How to avoid overpaying: ask for a flat price for the whole system rather than a per-vent or per-hour number, and ask for before-and-after photos so you know what was actually done. Every estimate we give is free, itemized, and written before any work starts.
Duct Repair & Sealing Near University City – Our Service Area
We serve University City and the surrounding communities, including Harrisburg, Huntersville, Derita, Highland Creek, Hickory Grove, NoDa, Plaza Midwood, Concord, Elizabeth, Myers Park, and Eastover. Because duct systems are graded by house style and age rather than zip code, we see similar failure patterns in the older homes near Plaza Midwood and Elizabeth as we do in newer construction around Highland Creek. If you’re not sure whether your address is in range, call and we’ll confirm. For related work, see our duct repair & sealing page for Harrisburg.
Serving University City, NC – Our Local Coverage Area
We serve University City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in University City
Duct repair and sealing is the work of correcting and closing the leaks, tears, and disconnected joints in a home’s duct system so conditioned air reaches its intended rooms without escaping. Repair addresses physical damage like crushed flex runs, popped metal seams, or failed insulation; sealing closes the joints and seams with mastic or equivalent materials. Together they restore the pressure balance the HVAC system was designed for. It’s different from cleaning, which removes what’s inside an intact system – repair fixes the system itself.
A typical single-system repair takes two to four hours depending on access and how many leaks we find. A job involving replacing multiple flex runs and re-sealing the whole trunk line can take a full day. We’ll give you a realistic time estimate upfront based on the inspection, so you can plan around it. Same-day service is often possible in University City if the schedule allows.
Duct repair and sealing in University City typically costs $250 to $900 depending on scope, with most jobs falling in the $350 to $650 range. The final number is set by a written, flat-price estimate given before work begins, and the estimate itself is free. Call (888) 972-5826 for an exact quote – estimates are free.
Yes – we operate professional-grade Rotobrush and Nikro duct cleaning systems as part of our work, and we also work with Abatement Technologies air filtration and remediation equipment. That means when a repair job follows a contamination concern, we can clean, repair, and seal the system in one visit rather than splitting the work between companies. The same equipment also lets us verify the system once the repair is done.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Same-day service is often available in University City, and a call outside dispatch hours is booked into the next opening. We don’t promise same-day service in every case, but we’ll tell you honestly what’s realistic when you call.
We stand behind the work we perform and will address anything we miss. Because warranty terms vary by scope and materials, we spell out what’s covered in the written estimate before work starts. If something doesn’t hold after a repair, we want to hear about it. Ask us directly when you call and we’ll explain the coverage that applies to your job.
Clear access to the attic hatch or crawlspace opening, and tidy the area around the air handler if it’s reachable. If you have pets, secure them away from the work area. Beyond that, there’s nothing you need to do – we bring the materials and equipment, and we’ll show you before-and-after photos of your own ductwork when the job is finished. Call (888) 972-5826 for a free estimate and we’ll walk you through what to expect.
Schedule Your Duct Repair & Sealing Service in University City Today
If your ductwork is leaking air into the attic instead of your rooms, we can find the leaks, seal them, and show you the difference. You get one flat price per system agreed before work starts, a free estimate, and before-and-after photos of your own ductwork. Call (888) 972-5826. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at University City Air Duct Cleaning.